Hotel Mirror,Bathroom Mirrors,Magnifying Mirror,Cosmetic Mirror For Hotel Uni-Sec (Ningbo) Electronics Technology Co., Ltd. , https://www.hospitalityunisec.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge> Common terms for bearings (2) Common terms for bearings (2)
11. Reliability (referring to bearing life) reliability /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
A group of nearly identical rolling bearings that operate under the same conditions. The percentage of bearings that wish to reach or exceed a certain number of lifespans. The reliability of a set of bearings is the probability that the bearing will reach or exceed the ruled life.
12. Extra life rating life
The guess value of the lifespan based on the radial fundamental extra dynamic load or the axial fundamental extra dynamic load.
13. Basic extra life
Additional lifespan associated with 90% reliability.
14. Life factor
In order to obtain a fundamental additional radial dynamic load or a fundamental additional axial dynamic load corresponding to a given extra life; a correction factor applicable to the equivalent dynamic load.
15. Bearing block plummer block
A combination of a radial bearing and a seat; a support plate on the support surface parallel to the bearing axis.
16. Vertical block plummer block housing
Mount the rolling bearing seat.
17. Flanged housing
a seat having a radial flange and a screw hole for the device on the outer surface of the support shaft.
18. Adapter sleeve
An axially open sleeve having a cylindrical bore; the outer surface is conical and has a small end with an external thread. For use with a tapered bore bearing assembly (with lock nut and lock washer) On the axis of the appearance.
19. Withdrawal sleeve withdrawal sleeve
a sleeve having a cylindrical inner bore axially open; the outer outer surface is conical and the outer end is externally threaded. For mounting the tapered bearing on the shaft of the outer cylindrical outer surface (with a nut).
20. Lock nut locknut
Screw nut with cylindrical outer surface and axial groove; lock the nut with one outer claw of the lock washer and the annular wrench. It is used for axial positioning of the rolling bearing.
twenty one. Lock washer lockwasher
A thin steel plate washer with many external claws. One outer claw is used to lock the nut; one inner claw is inserted into the axial groove of the adapter sleeve or shaft.
twenty two. Eccentric locking collar
a grooved steel ring having a pain in the inner hole at one end; the device is in the flat end of the inner spherical bearing with a flat and painful extension end. The inner ring is rotated relative to the inner ring to fix the inner ring; then the top wire is fastened to fix it Tight on the shaft.
twenty three. Concentric sleeve
The rim is mounted on the wide inner ring of the outer spherical bearing; the top wire is screwed into the hole in the inner ring and touched with the shaft.
Recommend to friends comments close window Bearing related knowledge Progressive short cylindrical roller bearing matching qualification method to test the registration of imported bearings
FAG bearing surface rust pre-disposal method bearing installation quality index ferritic analysis of rolling bearing
This article links to http://
Please indicate China Bearing Network http://
Previous:The need for NTN bearing high temperature rigid high-end equipment Next:The use of plasma nitriding skills in crankshaft production (2)
Source: Bearing network time: 2018-05-01