Stainless steel is a corrosion resistant steel alloy with a minimum of 10% chromium. There are different grades and surface finishes of stainless steel produced to accommodate the environment in which the material will be implemented. Unlike carbon steel, stainless steel does not rust when exposed to air and moisture due to the sufficient amount of chromium present. The chromium creates an invisible passive film of chromium oxide that will not let oxygen attack the surface and prevents rusting of the iron base.
Yuhong Group is a stainless steel manufactory of more than 20 grades of Stainless Steel.
Stainless Steel Flange,Stainless Steel Pipe Flange,Din Forged Stainless Steel Flange YUHONG GROUP CO.,LIMITED , https://www.jessro-pipefittings.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Drawing guidelines for fine guides Guidelines for drawing fine rails
Fine guides with high precision, motion accuracy and positioning accuracy (such as guide rails for CNC machines and measuring machines); the following guidelines should be followed when drawing: /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
1. The error satisfaction criteria are satisfied with the following three requirements; in order to make the rail system complete the errors to each other:
(1) It is necessary to set the central elastic link between the guide rails; for example, a roll plastic belt (sheet) or a fluid film.
(2) There must be a pre-tightening force between the guide rails in order to compensate for the touch error.
(3) The manufacturing error of the guide rail should be smaller than the deformation of the central elastic body (component).
2. Accuracy and mutual non-interference criteria can not be affected by the accuracy of the guide rails when they are produced and used. For example, the linearity of the rectangular guide rail and the linearity of the side guide rails do not affect each other during production. Flat-V guide rails The change of the lateral dimension of the combined guide rail does not affect the accuracy of the guide rail.
3. Dynamic and static conflict factors close to the standard when drawing the guide rail pair should make the dynamic and static conflict factors of the touch surface of the guide rail as close as possible; in order to achieve high repeat positioning accuracy and low speed stability; roll rail, plastic plate or plastic sheet Sliding rail; the collision factor is small and the static and dynamic conflict factors are close.
4. The guide rail pair active collation criteria should make the guide rails have high precision; it is necessary to make the guide rail pairs have the characteristics of active engagement. The horizontal guide rails can be attached by the components of the moving members, and the other guide rails need to be attached with spring force or roller pressure. Hehe.
5. All touch criteria The length of the fixed rail is necessary to ensure that the moving rail is in the two extreme orientations of the maximum stroke; the full length of the fixed rail touch (does not exceed the fixed rail); to ensure that the rail pair is always touched during the touch.
6. Resilience deformation and thermal deformation criteria When the guide rail and its support members are subjected to force or temperature changes; when drawing the guide rail and its support members; strive to deform it to become a desired shape. For example, the beam guide of a gantry machine tool; Convex; to compensate for the tortuous deformation of the headstock (or tool holder) component.
Recommend to friends comments close window Bearing related knowledge Front and rear code of Swedish SKF bearing (2)
Smooth method for rolling mill bearings Inch tapered roller bearings L68149/10
How to analyze the skills of high-speed spindle bearings for machine tools?
This article links to http://
Please indicate the bearing network http://
Previous:The super-finishing process of bearing ring is the next one: the device method of bearing
STAINLESS STEEL PRODUCTS
Source: China Bearing Network Time: 2018-04-18