Floors and tiles can be unsatisfying, and some owners' homes will experience arching, warping, tile cracking, hollowing, etc. These problems are caused by the quality of the products and the lack of paving. These problems are not easy to solve, so it is best to prevent them during the early construction. Come listen to someone's Tucao! The tiles that have been cut are cracked. My house was renovated last year. It was found this year that all the floor tiles that were cut around the corner were cracked and getting bigger and bigger. I don't know why the tiles were not loose, they were not arched, they were cracked. Is it shattered when it is cut? Xiao Bian answer: Every piece of tile is integrated, if the tile is cut, it may be nothing at the beginning of cutting, but after being cut, the overall strength and bearing have changed, so may be in the late Cracks slowly. In fact, just after it was cut, it was already cracked inside, but it was invisible to the naked eye. In the pavement process, workers use rubber hammers to strike on both sides of the tile. If the force is not uniform, the adhesion between the tile and the ground will be inconsistent. With the increase of the strength of the later cement and the increase of the tensile force, it is easy to tear the tile. . This kind of problem could not be seen at that time and it will slowly appear after paving. Xiao Bian suggestions: hidden projects are after sales, contact the decorating company to allow them to re-replace, pay attention not to the same problem. Why is the floor tile tilted? There is a large piece of floor tile in my living room that is upturned at the joints. The following space is empty, and it will be rocked when you step on it. Not long after the renovation, it is so inexplicable that you don’t know where else will be. The more you come. Xiao Bian answer: After the tile is finished, it should be wetted. It is to sprinkle water on the ground within 24 hours after the tiles are attached to keep the tiles moist. Generally, it needs to be maintained for a week, so that the cement absorbs enough water to achieve the required strength. The owner’s home may have omitted this step, so the ground will always be dry. Waiting to stay after the tiles are soaked in water, there will be some changes in the tiles. Of course, this is also related to the quality of the tiles themselves. If the density of the tiles is not sufficient, after a long period of stamping, the tiles will naturally separate from the concrete floor, creating empty drums and warping. Xiao Bian suggestions: After paving bricks, many homeowners' homes will have surplus tiles. In this case, workers can be asked to replace the empty tiles directly with the remaining tiles. The floor is cracked, and some are loose! My house has been renovated for more than ten years. The solid wood floors on the ground have all appeared a wide gap, and they are loose, unsightly and inconvenient. What should I do? Xiao Bian answer: solid wood flooring itself has a moisture content, after production through the drying, the use of the process, the original moisture content of the floor has evaporated, the water in the wood inside the space occupied by shrinking, the floor will shrink. For solid wood flooring, this is a normal phenomenon and it is easy to use such problems after a period of time. Xiao Bian suggested: This situation can only be re-flooring. The decor is valid for around seven or eight years. Like the owner who has been in business for more than ten years, many problems such as wallpaper, paint, etc., need to be refurbished. Floor wood floor tile paving Ionic Liquids,N-Ethylpyridinium Chloride 99%,N-Butyl-N-Methylpyrrolidinium Bromide Cas 93457-69-3,N-Ethylpyridinium Chloride Cas 2294-38-4 Henan Tianfu Chemical Co.,Ltd , https://www.tianfuchem.com
