Towel racks are common hardware accessories in bathrooms. Compared with the main bathroom components such as bathtubs and toilets, the price of the towel rack is relatively cheap and does not cause too much attention of consumers. Some consumers are free to purchase a poor quality brand towel rack, which will cause inconvenience to future life. So, how do you choose a bathroom towel rack ? Here is a small series of the best home to explain to you. Towel rack how to buy a bathroom towel rack to buy skills 1. Material selection - good quality copper material The material of the towel rack can be roughly divided into four categories: stainless steel, copper, aluminum alloy and zinc alloy. The stainless steel towel rack is characterized by insufficient structure and low cost; the copper towel rack has the characteristics of stable structure, non-oxidation, good gloss and hardness; the aluminum alloy towel rack and the zinc alloy towel rack are between the two. Identify the material of the towel rack and use a sharp instrument to cut it somewhere. After the opening, the inside is a white metal-like zinc alloy material; the interior is golden yellow is a full copper material; the aluminum alloy material has a soft texture and is easy to cut; the stainless steel material is not easy to cut. When distinguishing the material of the towel rack, the merchant generally does not allow the customer to cut the surface of the towel, so as not to affect the product's selling phase. At this time, it is optional to cut on the base of the towel rack or the inner wall of the towel bar, so as to achieve the test effect without affecting the appearance of the product. 2, look at the surface - plating treatment has to pay attention to Due to the wet environment of the bathroom, the surface of the towel rack must be plated. At present, there are mainly three kinds of plating methods such as chrome plating, gold plating and wire drawing, among which chrome plating is the most widely used one. Before the electroplating, the blank of the towel rack is polished, surface decontaminated, etc. to ensure the adsorption stability of the electroplated layer. The thickness of the coating is generally calculated in microns, which cannot be judged by the human eye, but the quality of the product can be discerned by gloss and flatness. When you purchase the towel rack, you can observe the surface coating in the light or strong light environment to judge the gloss. In addition, you can use the fingertips to gently touch the surface of the towel rack to feel the smoothness and whether there is any foreign matter. Smooth, flat products are of good quality. 3, 掂 weight - not the heavier the better Regardless of the towel frame used, the rods are hollow. Some unscrupulous manufacturers, in order to blind consumers, fill the hollow towel rail tube with cement and other items to increase the weight of the product. This is harmful and unfavorable. The increased weight is not conducive to the stability of the towel rack, and it is easy to cause the screws to loosen and even cause the towel rack to fall off as a whole. Consumers should not be blinded by the weight of the towel rack when purchasing, so as not to lose weight. When purchasing, you can open the seal of the towel bar and observe the internal condition. The general towel bar seal is tight. Consumers can also estimate the weight of the towel rack by hand rubbing. If the towel rack feels heavy and the price is relatively cheap, consumers should pay more attention. 4, pick accessories - use stainless steel accessories Due to the large humidity and temperature difference of the bathroom, ordinary screws are easily rusted under these conditions, and the towel rack should use stainless steel screws to achieve moisture and oxidation resistance. Copper is a common towel base material. According to different materials, it can be divided into 59 copper (copper unit content is 59%) and 62 copper (copper unit content is 62%), such as less than 59 copper. Is not in compliance with national standards. Welding is also a detail that consumers can easily ignore. Welding seams need to be polished. Otherwise, the welded seams will not only affect the appearance, but also cause inconvenience to consumers during use. When purchasing, consumers should not be too light on the above details. It should be observed whether the welding of the towel rack has been polished. Beware of the distribution of non-steeled screw fittings. The brand towel rack pays more attention to the quality of the small parts. It is recommended to buy a brand towel rack. The above is a small tutorial to teach everyone to buy a bathroom towel rack tips, I hope to help everyone, more relevant information, gently look forward to the tracking report of the small Jia.
Engineering wood is in normal wood as raw material, using the bionics principle, through to the ordinary wood, mimosa various modified chemical processing production of a more superior performance of the whole wooden new decorative material. Compared with natural materials, it is almost not bent, cracked or twisted.Its density can be artificially controlled, stable product performance is good, in the process of machining, it does not exist when the natural wood processing of waste and losses, can increase the wood comprehensive utilization to 86% above.Engineering wood is not solid wood, but synthetic compound products.Engineering Wood can be widely used in furniture, decoration, floor, , doors and Windows, sports materials, and other fields.
Luli Group Co.,Ltd is a specialized manufacturer and exporter for wood products with more than 20 years experiences . And produces high quality Engineering wood but low price Engineering wood.
The details of engineering wood
1.Size:620/640MM*2500/1270*2520MM,630-850*1270MM ETC.
2.Thickness:15-100MM/0.1-0.6MM
3.Species:Walnut,Teak,Zebra,White/Red oak,Sapele,ETC
Engineering wood Engineering Wood,Engineering Teak Wood,Layer Engineered Wood Floors,Synthetic Engineering Wood Luli Group Co.,Ltd. , https://www.plywoods.nl