First, the scope of application Electronic universal testing machine is widely used in various metal, non-metal and composite materials, such as wood, plastic profiles, wire and cable, paper, film, rubber, medicine, food packaging materials, fabrics, etc. for tensile performance testing. At the same time, according to the domestic and international standards provided by users, various test data processing software and test aids can be customized. The digital display electronic universal testing machine is suitable for users who only ask for relevant data such as force value, tensile strength and compressive strength. If the demand is a relatively complicated parameter, it is a better choice to purchase a computer controlled electronic universal testing machine. Second, the use of performance Electronic universal testing machine, no oil source, so it is cleaner, more convenient to use and maintain; its test speed range can be adjusted, the test speed can reach 0.001mm/min~500mm/min, the test stroke can be determined according to needs, more flexible The measurement accuracy is high, and some can even reach 0.2%; the volume is small, the weight is light, the space is large, and the corresponding device is conveniently added to do the mechanical tests of various materials, and the utility model is truly multi-purpose. The CMT series microcomputer control electronic universal testing machine produced by Jinan Xulian Instrument Co., Ltd. can achieve closed-loop control such as load control, strain control, displacement and speed control. Third, the structural characteristics The electronic universal testing machine mainly uses the servo motor as the power source, and the screw and the nut are used as the execution components to realize the speed control of the moving beam of the testing machine. In the transmission control, synchronous toothed belts and servo motors are used; on the force measuring, the electronic universal testing machine adopts load sensors, which has the characteristics of low transmission and low noise. The hydraulic universal testing machine mainly uses a high-pressure hydraulic source as a power source, and uses a manual valve, a servo valve or a proportional valve as a control element for control. Ordinary hydraulic universal testing machine can only be manually and manually loaded. It belongs to the open-loop control system. Due to the price factor, the load cell generally uses a hydraulic pressure sensor. The electro-hydraulic servo universal testing machine uses a servo valve or a proportional valve as a control element for control. The electro-hydraulic servo universal testing machine of Jinan Xulian Instrument Co., Ltd. uses a high-precision load sensor for measuring force with higher precision and can reach Level 0.5. Fourth, the price The electronic universal testing machine below 300kN has advantages. The hydraulic universal testing machine is mainly used for testing mechanical properties such as tensile, compression and bending of metal and non-metal materials and parts, components and components. The hydraulic universal testing machine is an ideal test equipment for industrial and mining enterprises, building materials, quality inspection centers, water conservancy and hydropower, bridge engineering, scientific research institutes, and mechanical laboratory of colleges and universities. Manually controlled hydraulic universal testing machine, because it does not meet the standard requirements at present, it is not recommended for customers to purchase. The electro-hydraulic servo universal testing machine is the best choice. At the same time, the electro-hydraulic servo universal testing machine has a single space structure and In the double space structure form, the universal testing machine in the form of double space structure is slightly unchanged due to the operation in the upper space, but the price is low. The universal testing machine with single space structure has low test operation position, is ergonomic, and has high rigidity. It does not need to lay foundation. At the same time, the universal testing machine with single space structure can be equipped with double-sided flat push clamp and tensile test. The jaws used can greatly improve the service life, and the use cost is low in the later stage. Generally, the steel enterprise users choose a single space structure. For the detection mechanism, the single space structure is actually a good choice. Compared with the electronic universal testing machine, the electro-hydraulic servo universal testing machine of 300kN or above has obvious price advantage. Five, after sales service The after-sales service of the testing machine is also very important, because the testing machine is a mechatronics equipment, involving mechanical, hydraulic, electrical, computer software and many other aspects, any aspect may affect the success or failure of the test and the experience of the test itself. . Therefore, when purchasing a testing machine, the comprehensive ability of the testing machine itself is mainly due to the research and development capability, because the quality of the equipment or the rationality of the design will affect the operation and equipment life, including the materials used. Hydraulic components, servo motors, etc., however, the "comfort" used is determined by the software, and the "accuracy" of the control is determined by hardware electrical control. Therefore, when purchasing a universal testing machine, we should not only consider the price factor, but comprehensively consider it, clarify the purpose of the test, and purchase a testing machine. Concerned about surprises Label: Five aspects to buy universal testing machine Previous: Principles and procedures for pump selection Next: Peristaltic pumps and other chemical pumps in the corrosive chemical industry Titanium Disks,Forged Titanium Disks,Round Titanium Disks,Titanium Alloy Disk Baoji Yongshengtai Titanium Industry Co., Ltd. , https://www.bjystititanium.com
The hydraulic universal testing machine is limited by the flow rate of the oil source and the test speed is low. Manual hydraulic universal testing machine, the operation is relatively simple, the price is cheap, but the control precision is low, and it has not met the requirements of GB/T 228.1-2010; the electro-hydraulic servo universal testing machine has the performance compared with the microcomputer-controlled electronic universal testing machine. In addition to low speed, the control accuracy is not inferior; the microcomputer-controlled electro-hydraulic servo universal testing machine with load sensor can also achieve a force value accuracy of 0.5%, and it is more reliable, stable and has a strong mechanical strength test for large tonnage. Cost-effective. The WAW series microcomputer-controlled electro-hydraulic servo universal testing machine produced by Jinan Xulian Instrument Co., Ltd. meets the requirements of GB/T 228.1-2010. At the same time, the product has a fast-down function, and the test efficiency has the same efficiency as manual operation. 