A bright ceiling lamp gives people a bright light and illuminates the night. As time went by, it was discovered that the lights slowly turned gloomy, and they sought out the reasons. The result of some inspections is that the light bulb is no problem, and the bleakness is due to too much dust attached to it. This reminds me that ceiling lights haven't been cleaned up until now. So how do ceiling lamps clean and maintain? 1, Ceiling lamp maintenance considerations Installation Attention to roof conditions: If it is a masonry roof, use pre-embedded bolts, or use expansion bolts, nylon plugs, plastic plugs, etc., and do not use wooden wedges. Do not hang too many decorations on the lamps at ordinary times, otherwise you will fall out of the load capacity and hurt. Pay attention to maintain the appropriate indoor temperature: In particular, crystal ceiling lamps often specify a specific ambient temperature, too high or too low a temperature will affect its life, so keep the temperature appropriate. Check the lamps regularly: If the lamp feet are in poor contact or the starter is loose, it should be reinstalled and adjusted in time. Avoid hard objects hit the lamp: otherwise it is easy to scratch the surface of the lamp, and in severe cases will cause the lamp body to crack. If you want to move the luminaire, keep it balanced. 2, the daily cleaning method of ceiling lamps Since the ceiling lamp is hung at a high place, the lampshade and the bulb are easily broken. Therefore, when removing the lampshade, try to cooperate with two people; before disassembling, turn off the power first, and do not use a wet rag to scrub the lamp holder to prevent leakage. The cleaning of the ceiling lamp shade, according to the different shade lamp shade material, also have different cleaning methods: fabric shade, first use a small vacuum cleaner to suck off the surface dust, decoration how to save money? On the home improvement network, free design budget quotes. Then pour a few detergents to scrub; if the inside of the lampshade is a paper material, you should avoid using detergent directly to prevent breakage, wipe it with a dry cloth; use a soft cloth to wipe the toothpaste on the glass cover of the frosted glass and clean the dirt at the concave and convex points. Soft cloth wrapped toothpick processing. The dirt on the lamp holder is clean. You can remove the dust on the surface first, and then wipe it with a toothpaste with a cotton cloth. Do not allow moisture to remain on the lamp holder. When scrubbing ceiling lamps, light cotton socks or cotton gloves should be put on the hands, gently wipe the lamps, and do not move the parts inside the lamps. After the cleaning is completed, the lamps should be installed as they are. Do not miss or replace the parts. Ceiling light home care
CPVC Pipe and fitting industrial class is made by material CPVC resin from Lubrizol and Arkema, it has excellent properties of corrossion resistance, high working temperature up to 95℃, good flame retardancy and excellent aging resistance, light weight, easy installation and maintaince, etc.
Ningbo RMI Plastic Co.,Ltd produce CPVC pipe and fitting as per standard DIN with pressure rate PN16, size from 20mm to 600mm.
CPVC pipe and fitting includes: CPVC coupling, CPVC elbow, CPVC tee, CPVC flange, CPVC reducer, CPVC bushing, CPVC end cap, CPVC union, it is used for water treatment, chemical industrial, steel factory acid pickling system, smelting industry, papermaking industry, etc.
CPVC Pipe Fitting,CPVC Pipe,Plastic Fitting,CPVC Pipe Fitting PN16 Ningbo RMI Plastic Co., Ltd. , https://www.rmiplast.com
