Zinc-linked chain linking nets are also known as diamond-shaped nets, trapezoidal nets and slope protection nets. Widely used in warehouses, tools, refrigerated, protective reinforcements, parks, zoo fences, marine fishing fences and fences on construction sites, the protection of machinery and equipment, highway guardrails, stadiums, fences, roads, green belt protection network.
The hook flower net produced by our factory adopts crocheting technology, with uniform mesh, smooth mesh surface, beautiful appearance, no corrosion, long service life, excellent material quality, beautiful appearance and practicality. Special specifications can be customized according to customer needs.
The tensile strength of the galvanized chain link network is related to the use and service life of the screen. The following Ze Chuang wire mesh factory share some relevant knowledge about tensile strength.
Galvanized chain link network noun explanation and calculation formula: Tensile strength is the maximum tensile stress that the product can withstand before tensile fracture (that is, the tensile load damage cross-sectional area).
The yield strength is divided into upper flexion and lower flexion. It is the process in which the stress does not increase and the deformation continues to occur during the stretching process. The maximum stress before the initial fall of the force value is the flexion strength; the yield strength must be smaller than the tensile strength value.
Non-proportional extension strength: mainly for hard steels that do not have a yield point, the rule that the residual elongation at the local part of the gauge length is 0.2% of the original gauge length is the rule non-proportional extension strength, and the total extension strength is The stress at the 0.5% rule has detailed rules in the specification GB/T228.

.25 Caliber Power Loads include

S43   Series      .25 Caliber Single Shot Loads - Long    -  Size: 6.3x16 mm

S42J  Series      .25 Caliber Plastic 10-Shot Strip Loads  -  Size: 6.3x10 mm

S42G Series      .25 Caliber Metal 10-shot Disk Loads    -  Size: 6.3x10 mm

.25 Caliber Powder Loads S43 S42G S42J

.25 Caliber Power Loads

Ramset Power Loads,Powers Metal Disc Loads,Metal Disc Loads,Low Velocity Strip Loads

Sichuan Nanshan Powder Actuated Fastening System Co., Ltd. , https://www.nanshanpat.com