The diseases of stone can be basically divided into two categories: one is that the micropores of the stone are occupied by foreign bodies, and the microstructure of the stone itself has not been obviously damaged, such as most rust yellow spots, organic spots, salt spots and white hua, water traces. And water spots, oil spots and oil stains, etc. For these conditions, professional cleaning is the preferred method. When cleaning, care should be taken to clean the cleaning agent. After the refurbishment treatment, since the microporosity of the stone has been opened, the specific surface area is increased, so that the adsorption capacity of dust and dirt is increased, and if it is not timely protected The treatment is easily contaminated again. Tips: 1. Do not touch non-neutral items. Because all stones are afraid of acid and alkali, acid often causes oxidation of sulfur-iron minerals in granite and causes yellowing. Acid will decompose calcium carbonate contained in marble, causing surface erosion, and alkali will also erode granite. The grain boundary of the quartz telluride in the middle causes the phenomenon of grain peeling. 2, can not be free to wax. Not only will it block the capillary pores of the stone, but it will also be stained with dirt to form wax scale, which will cause yellowing on the stone surface. 3. Do not use non-neutral detergents. 4, can not cover carpets, debris for a long time. 5, to regularly maintain, maintain the gloss by dust. 6, always keep ventilation and dry stone is afraid of too much ambient humidity. Concerned about surprises Label: How can stone be "resident" Previous: Stone care industry belongs to the emerging industry in China Next: The new experience of shower room installation reveals the mystery of the shower room Tangless Inserts,High Quality Tangless Inserts,Tangless Inserts Details, CN Xinxiang Donghai Industry Co., Ltd. , https://www.thaicoil.com