Is the PVC line pipe buried deeper or shallower when the triple roller gate is installed? For a friend who just engaged in the installation of the triple roller gate, perhaps I don't know much about it. Then, the following Xiao Bian will give a brief summary of how to properly install the three-roll gate. The three-roll gate manufacturer's innovation is based on the three-roller gate sales and installation implementation project for many years. The solution for the three-roller gate installation is whether the PVC line pipe is buried well or shallowly. The three-roller gate wire is divided into strong electric cable lines. And weak cable. It is often the use of 3/4" PVC line pipe for high- and low-voltage cable lines respectively, and the three-roll gate cement is buried in the corresponding position; at the same time, the three-roller gate manufacturers are here to remind dealers, three rollers. When the gate is installed, the depth of the buried PVC pipe should be greater than 60mm, and the height of the exposed ground should be greater than 50mm, and the outlet should be returned to the bend to prevent the three-roll gate of the line pipe from entering the water. In addition, when installing the three-roller gate, please open the cover of the chassis, connect the ~220V power supply, and be reliably grounded. After all stops, close the air switch and the switchboard L5. The L6 lamp is on, the motherboard number pipe shows “RUNâ€, the lift rod is raised, and the gate is in working condition. Remind: When the three-roll gate equipment is used outdoors, a 100mm to 200mm high cement installation platform should be installed at the equipment installation site to prevent moisture; at the same time, above the equipment, sunscreen and other rain protection measures should be installed. Do not use the device directly in an open air environment. Aluminum Disc,3003 Aluminium Disc,3003 Aluminium Circle,Dc Aluminium Circle Zhengzhou Yearshine Industry Co., Ltd , https://www.zzyscorp.com