Sealand is a professional supplier of Water Mass Flow Meter, Beverage Mass Flowmeter, Water Mass Flowmeter, Beverage Mass Flow Meter, Palm Oil Flow Meter, ATEX, IECEx & CE approved.
It has self-diagnosis function.
The transmitter & software will self-diagnose once powered on/ connected.
Please keep the meter in good condition during transport, better packed in the original
package from the manufacturer.
a) Waterproof and moisture-proof;
Water Mass Flow Meter, Beverage Mass Flowmeter, Water Mass Flowmeter, Beverage Mass Flow Meter, Palm Oil Flow Meter Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com
The transmitter will show error code immediately on the top of display if there is anything
wrong.
1.Error 01: Sensor error; 2.Error 02: Temp. sensor overrun;
3.Error 03: Zero failed; 4.Error 04: Transmitter initializing.
To callout the interface on software, click tool bar > Functions > Status. The light in front is
green when everything is fine, but will be red if there is any error.
Please make sure the site meets following requirements, if keep the meter in storage.
b) With few mechanical vibration and crush;
c) Temperature from -30°C to +65°C;
d) Humidity less than 80%, better about 50%;
e) Please clear up the sensor if storage used one;
f ) Performance will be influenced if storage in the open.
Pesticides and fungicides should not be mixed with **microbial pesticides**. This is because many fungicides are harmful to microorganisms, and combining them can significantly reduce or even neutralize the effectiveness of the microbial pesticide.
In addition, it's important to be cautious when using compound pesticides. Before mixing, always check the main active ingredients listed on the label. Don’t mix them blindly, as this can lead to wasted resources or even crop damage. Even if some pesticides are compatible, they should be used immediately after mixing, as prolonged storage may cause degradation and reduce their efficacy.
Before deciding to mix any pesticides, it’s crucial to carefully read the product instructions. Understanding the properties and compatibility of each product is essential. If you're unsure whether two products can be mixed, don't take chances—consult a technical expert or the manufacturer for guidance. Making an informed decision can help prevent costly mistakes and ensure the best results in pest control.
Always prioritize safety and follow the recommended guidelines to maximize the performance of your agricultural inputs.