The overhead floor is an anti-static raised floor, which is a kind of anti-static floor. Due to the special use environment of the raised floor, the following points should be noted during the use! (1) The equipment with the sharp and sharp edge is prohibited from directly working on the decorative surface of the raised floor to prevent damage to the antistatic performance and aesthetics of the decorative surface. (2) During the course of use, it is forbidden for people to jump directly from the height to the raised floor, and to carry and bruise the raised floor when moving the goods. (3) When carrying items on the raised floor. It is forbidden to directly push the object on the board surface, causing the object to directly rub against the ground, causing the board surface to be scratched. (4) When transporting articles, use a cart with a rubber wheel for handling or laying a spacer between the contour of the object and the raised floor to prevent damage to the board surface. (5) When placing heavy objects on the raised floor, it should be placed smoothly to avoid damaging the floor. (6) When using the equipment in the lower space of the raised floor, use the overhead floor suction plate to install the overhead floor, and remove the overhead floor to avoid light damage to the raised floor. (7) The use of thousands of net mops and rags can be used to clean the surface of the board. Be careful not to spill a large amount of detergent liquid on the raised floor to prevent the liquid from flowing under the raised floor to affect the normal operation of the lower line and equipment. Concerned about surprises Label: overhead floor maintenance Previous: Five maintenance methods for hardware accessories Next: Maintenance and maintenance rules for overhead floors
20W Glue Guns Features:
1. Versatile
2. Easy
3. Quick
4. Proective Nozzle Cover
5. Trigger Flow Control
6. Bonds instantly
7. High quality
8. High temperature or low temperature
9. New design
10. With switch function
Idea for many applications. Fastening various materials such as paper, cardboard, fabric,wood, lace,trims,leather,metal,glass, tiles, rubber, ceramics and flooring etc.Ideal for hobby and household repair,DIY&craft projects.
Designed and manufactured to the highest of standards to ensure a robust and long life, we hope it provides you with many years of trouble-free, safe and reliable service.
Important Caution:
1． Before use the glue gun, check if the plug cord into electrical outlet properly;
2． When glue gun in first use, the heating element will have small smoke, it is normal situation, but the smoke will disappeared after 10 minutes;
3． After power, not for a long time in standby mode(not longer for 20 minutes), when the suspension of use, unplug first.
4． Avoid to use the glue gun under very hot or very cold environments.
5． Better not work under direct cold wind blowing, it will reduce efficiency and loss power
6． When in continuous using, do not press the trigger with great pressure, and try to squeeze out the un-melted glue, it would damage the glue gun
7． Not applicable for bonding heavy objects or objects needed strong adhesive
8． The quality of glue stick will directly influence the glue gun function and sticking objects quality;
9． If the power cord is damaged, do not replace it by yourself, must ask for professionals to replace it.
10． This tools must b e placed in its position when not in use. And storage before the tools complete cooled.
11． Be careful when using any other electrical appliance with flammable material.
12． Not applicable for a long time in the same place.
13． Do not use an explosive gas atmospheres.
14． Note that heat may be the line of sigh, combustible materials.
15． Do not leave equipment unattended when switched on.
16． This appliance is not intended for use by persons(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
17. Children should be supervised to ensure that they do not play with the appliance.
Using methods
1. Glue gun using voltage is 110-220V AC,50/60Hz;
2. Tip gun forward on stand and place a piece of cardboard under the nozzle
3. Use 7-8mm (mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks through
4. After power, wait for 5-10 minutes to allow glue to soften
20W Glue Guns, 20W Mini Glue Gun, Regular Glue Gun Ningbo Kingvos Electrical Appliance Co.,Ltd , http://www.kingvos.com
tunnel at back of gun