}Product Features | Energy-saving | l ed roadway lights ||The only mine explosion-proof 15 lane lights | custom roadway lights ||
1. Explosion-proof , 2. Safety , 3. Stable, 4. High quality and safety level , 5. The main products are mainly yellow.
} Applicable occasions [ energy-saving led roadway lamp / the only mine explosion-proof 15 W roadway lamp / custom roadway lamp]
Applicable to the underground coal mine with methane and coal dust explosive gas mixture. Coal mine transportation roadway, bottom hole yard, electromechanical chamber, return air roadway, coal preparation plant lighting.
} Product Overview [ Energy-saving led roadway lamp / the only mine explosion-proof 15 W roadway lamp / custom roadway lamp]
The LED roadway lamp adopts the most advanced green light source and high-power LED as the light source, and is designed and manufactured according to the requirements of the national standard GB386.1.2.3-2000 Explosive Environmental Electrical Equipment. The explosion-proof mark is ExdI, and the product implements standard lamps through the coal industry. Shanghai explosion-proof electrical inspection stations qualified, safety standard issued by the national mine safety certificate product safety signs Center.
} Features[ Energy-saving led roadway lamp / only mine explosion-proof 15 W roadway lamp / customized roadway lamp]
â—† Mine explosion-proof LED roadway lamp adopts international advanced electronic integrated circuit, wide voltage design, with a wide range of working voltage, 85V ~ 265V voltage can work normally. The light source adopts DC and low voltage power supply, no stroboscopic and electromagnetic interference, no red (purple) external radiation, no mercury vapor and other pollutants in the fluorescent lamp, which meets the EU future lighting production standards, is a safe and healthy lighting source, and has obvious environmental protection effects. .
â—†The power consumption is extremely low. Under the same illumination, the power consumption is 1/10 of the incandescent lamp and 1/2 of the energy-saving fluorescent lamp, which has obvious energy saving effect.
â—† Reasonable structure, beautiful appearance, small size, light weight, explosion-proof, anti-shock vibration, heat and humidity resistance, good sealing and maintenance-free .
â—† lamps using power light source and a separate wiring sub-space unique design, so that the entire lamp is not only appearance, easy to install, but also improves the lamp explosion, impact, shock resistance, heat resistance performance indicators in full compliance National and industry standards for mine explosion-proof lamps .
} Installation method: [ energy-saving led roadway lamp / the only mine explosion-proof 15 W roadway lamp / custom roadway lamp]
1 Firstly, according to the actual needs of the work site, determine the installation position and mode of the lamp, and then prepare the corresponding length of Φ8 ~ Φ14 mm three-core cable according to the distance from the lamp to the power contact.
2 Open the set screw on the side of the upper cover of the lamp, then loosen the compression nut of the lamp cable inlet, open the upper cover, and introduce the power cable through the compression nut to the internal terminal, and connect it as shown in the figure. Then tighten the cable tie nut and the lamp cover.
3 When replacing the lamp, unscrew the hexagon socket set screw that fixes the lamp ring, unscrew the lamp ring and the transparent component and the lamp body, replace it with a new one, and install the lamp in the opposite direction.
caveat:
1. The power must be turned off before replacing the lamp and disassembling the lamp.
2. It is strictly forbidden to turn on the electricity.
3 , when using, the surface of the lamp has a certain temperature rise, which is a normal phenomenon; the transparent part has a high temperature at the center and must not be touched.
4. When installing the luminaire, the luminaire should be safely grounded.
Performance parameter
} Main technical indicators | Energy-saving led roadway lamp / only mine explosion-proof type 15 W roadway lamp / customized roadway lamp]
1. Explosion-proof performance: explosion-proof type, in line with national and industry standards
2.IP rating: IP65
3. Working environment: -20 degrees - +60 degrees
4 power specifications:. 10W, 15W, 18W, 20W, 24W, 30W, 36W, 50W, 60W, 100W
5. Weight: DGS20 ( 30 ) /127L ( A ) type lamp 2.73 kg
6. Use the power supply: AC85V-265V , 50HZ
7. Illuminance: Lx (3 meters ) ≥ 45
8. Use rated voltage: 127V
|| Energy-saving led roadway lamp division || http://qqhjxd.cn.china.cn || 