People have no need for wood products to meet the needs of the function. Or proceed from the satisfaction of the spirit and aesthetic needs. It is often required to process wood into a variety of curved shapes, such as in some furniture, window frames, and the like.
There are two major types of methods for manufacturing curved parts: sawing and pressure bending. The sawing process is performed by cutting the wood into a curved shape and then further processing into a curved part. Since a large number of fibers are cut, the strength of the part is low, and the quality of the coating is poor, especially when the bending angle is large and the ring part is produced. The yield is low and wood waste is severe.
The pressure bending process of the Malacca eco-board is also called bending forming processing, and the square or thin plate is made into various curved parts by the method of heating and pressing, and becomes a curved ecological board. This kind of ecological board has many advantages. In the process of processing, there is no waste loss. Generally, plastic processing is simpler and faster than ordinary woodworking machine processing. The bending molding processing equipment has relatively low investment, relatively small power, and curved molded parts. Its strength and rigidity are larger than the sawing area, so the Malacca ecological board is bent and processed to meet the people's requirements for the shape and quality of furniture and various ecological board products, as well as to save wood resources and improve the utilization rate of wood. Important value! Article from Strolling Natural Brands Xiangyang Wood Industry Fir Ecological Board: