When working with TIMKEN bearings, it's essential to pay close attention to several key factors during the measurement process. These details ensure accurate results and proper functionality of the bearing in its application. Here are some important points to consider:

1. Bearing Thickness: When measuring the thickness of a TIMKEN bearing, be cautious about any slight reduction near the opening. The measurement should transition smoothly from a flat surface to a spherical one to avoid inaccuracies.

2. Measurement Tolerance: For imported TIMKEN bearings, the thickness should typically be controlled within a range of 0.05mm to 0.1mm. Exceeding this range can lead to incorrect inner diameter measurements, which may affect the performance of the bearing.

3. Inner Diameter Measurement: To measure the inner diameter accurately, the bearing must be tightened to the cap bolt using the recommended torque. Use an inner diameter gauge after calibrating the outer diameter micrometer. Ensure that the measurement is taken away from thinning zones to prevent errors.

4. Coaxiality of the Inner Hole: Coaxiality error in the bearing hole is a major cause of misalignment in the main TIMKEN bearing. This can result from deformation of the cylinder body or errors in the bearing shaft axis. Ensuring proper alignment during installation is crucial for long-term performance.

Recommended for friends: Comments | Close Window

This article is linked to http://

Please indicate the source: China Bearing Network http://

Previous: Smooth Method for Selecting Imported Bearings | Next: Technical Support for Import Bearing Selection

Bottle Washing

Laboratory Squeeze Bottles,Squeeze Wash Bottles,Laboratory Wash Bottle,Lab Plastic Wash Bottle

Taizhou TOPAID Medical Device Co,,ltd , https://www.topaidgen.com