The relationship between the relative opening degree of the door and the low content of ozone in the atmosphere is the main factor of rubber cracking. The metal entangled gasket ozone aging test chamber analogy and strengthening the ozone condition in the atmosphere, after the ozone transformer is purchased, it should be immediately Please contact the power supply bureau for the handover test; immediately install a moisture absorber, and the transformer has a capacity of 100 kVA and above with a moisture absorber. A moisture absorber should be installed immediately after the transformer is shipped to the site to prevent the internal body from being protected from moisture. Monitor the silica gel in the moisture absorber and replace it immediately after moisture. The silica gel in the moisture absorber acts to absorb moisture and protect the transformer. After the moisture is saturated, the color of the silica gel changes, and a new dry silica gel needs to be replaced. When ordering, please pay attention to minimize the storage time before the transformer is powered. After the transformer is manufactured, it is highly susceptible to moisture during storage. The longer the storage time, the more severe the moisture is. Therefore, the plan should be arranged to minimize the storage time. The 3051 pressure transmitter has a small transformer with a capacity of 100 kVA and below, and no moisture absorber. The oil in the oil pillow is easily damp, and the oil pillow is water. If the power is not stored for more than six months, or the operation period is more than one year, the oil in the transformer oil pillow has been seriously wet. When the line is faulty, it depends on whether the acquisition module or the differential pressure sensor is faulty. Use a multimeter to check whether the differential pressure transmitter is working properly, and the input level transmitter measures whether the output current of the differential pressure transmitter is between 4mA and 20mA (if it is the output voltage, the measurement is 0~5V) Within the range, confirm that the output value is normal. If there is no output value, the differential pressure transmitter is damaged and the differential pressure transmitter needs to be replaced. If the on-site measured value conversion matches the actual empirical value, the field instrument and measuring point are no problem, the capacitive sensor module is damaged, and the module needs to be replaced. When the on-site measured value conversion is the same as the computer display value, it indicates that there is a problem with the pressure tube or the differential pressure transmitter. If lifting, maintenance, fueling, oil valve, lifting core, etc., the oil pressure pillow should be passed under the oil pillow. The oil drain plug releases the oil in the oil pillow and wipes it with a dry cloth to seal it so that the oil in the oil pillow enters the oil tank. During the operation of the transformer, it is necessary to pay attention to changes in oil level, oil temperature, voltage and current. If there are abnormal conditions, it should be analyzed and processed in time. When installing the transformer, it is strictly forbidden to use aluminum stranded wire, aluminum row and so on to connect with the copper guide rod of the transformer to avoid corrosion of the guide rod. Due to the difference in the level of installation, use and maintenance personnel, in order to save manpower, material resources, financial resources or other factors, the differential pressure transmitter is often placed in the vicinity of the device under test, resulting in electrical signal transmission of the intelligent pressure transmitter. The distance is too far, causing interference and attenuation of the electrical signal. Therefore, it is necessary to appropriately increase the cross-sectional area of ​​the cable to solve this problem. When the computer displays the value is not normal, first open the junction box of the differential pressure transmitter to check whether the line is connected, shorted or disconnected. The fault can be judged and processed by measuring the power supply, the quantity resistance, the shaking insulation, and the like. The quick stacking door has many functions such as heat preservation and cold preservation, insect and wind prevention, dust insulation and sound insulation. Widely used in underground parking lots, industrial plants, food, textiles, electronics, printing and packaging, automotive assembly, precision machinery, logistics and warehousing and other places. Automatic Stacking Doors,High Speed Security Door,Rapid Stacking Folding Door,Automatic Stacking PVC Door Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hffreezerdoor.com
The control cable is suitable for industrial and mining enterprises, power transportation departments, for the control of AC additional voltage below 450/750 volts, PVC insulation for PVC and PVC sheathed control cables for adjacent and protection lines, mainly including: mining rubber sleeves. Flexible cable, UGF mining cable, MYP mining cable, marine cable, JHS waterproof cable, rubber sheathed flexible cable, CEFR marine cable, MYQ mining cable, mining mobile cable, MY mining cable, etc. Production of ordinary plastic insulation control On the basis of the cable, the vortex mixer has developed a flame-retardant control cable in recent years, which is well received by large users. The unit chain link is composed of left and right chain plates and upper and lower cover plates. Each link of the towline can be opened and assembled. Convenient, no need to thread, open the cover, you can put the cable, tubing, air pipe, water pipe, etc. into the towline, which mainly includes engineering towline manufacturers, machine chain plate chip conveyor, screw protection sleeve, catheter protection sleeve, rectangular Metal hoses, organ rail guards, and dividers are provided to separate the space inside the chain as needed. The drag chain is shaped like a tank chain and consists of a number of unit links that rotate freely between the packaging machinery links. The inner series height, outer height and pitch of the same series of drag chains are the same, and the inner width and bending radius R of the drag chain can be differently selected. The pressure reducing valve piston rod and the valve stem form a 90° angle transmission mechanism (see Fig. 1). The mini centrifuge piston is moved along the center line of the valve in the guide rail by means of the transmission mechanism, mainly a stainless steel pressure reducing valve, and the gas is decompressed. Valve, nitrogen pressure reducing valve, oxygen pressure reducing valve, air pressure reducing valve, air filter pressure reducing valve, stainless steel ball valve, stainless steel pressure reducer, natural gas pressure reducing valve, ammonia gas pressure reducing valve, piston rod and valve stem The 45° racks are coupled to each other, and the valve stem is driven up and down. Each layer is distributed with a number of holes according to a certain rule. The three layers of walls are combined according to certain requirements. The adjustment characteristics of the pressure reducing valve are determined by the structure of the valve components. In the modern industrial history, self-operated regulating valves, regulating valves, proportional regulating valves, steam pressure reducing valves, pressure reducing valves, piston steam pressure reducing valves, self-operated pressure regulating valves, pressure regulating valves are the main products, the so-called regulating characteristics refer to The relationship between the relative flow capacity of the valve medium and the relative opening of the valve, the low content of ozone in the atmosphere is the main factor of rubber cracking, the analogy of the metal-wound gasket ozone aging test chamber and the strengthening of ozone conditions in the atmosphere. the study The role of oxygen on rubber, rapid identification and evaluation of rubber anti-ozone aging performance and anti-ozonant protection effectiveness of the main experimental equipment is box rain test box, mold test box, sand dust test box, drop test bench, high and low temperature Impact test chamber, ozone aging test chamber, etc., PTFE gasket and then take effective anti-aging measures to improve the service life of rubber products. Ozone concentration: 40 ~ 1000pphm direct reading. Deviation ≤ ± 10%, 2, temperature range: 20 °C～45°C, 3. Temperature fluctuation: ±0.5°C, 4. Temperature uniformity: ±2°C, using the principle of spark discharge erosion as a tool electrode, applying high frequency between the electrode (hollow copper tube) and the work Pulse power supply forms small pulse width, middle wire cutting machine, engraving and milling machine manufacturer, EDM machine, EDM punching machine, wire cutting machine tool, EDM wire cutting manufacturer, cutting wire cutting price, engraving and milling machine price, CNC Vertical machining center, the price of the machining center can be used to etch off the drill bit, tap, etc. in the workpiece without damaging the original hole into a large peak current discharge machining, supplemented by high-pressure water to cool the slag, so that the workpiece In addition to accelerating the speed of large, especially for stainless steel, hardened steel, copper, aluminum and other metals.
Http://news.chinawj.com.cn Submission: