Before we decorate the house, we need to know the whole process of decorating the house so that we don’t know what to do during the renovation process. Let’s take everyone together to find out the right steps to decorate the house. A friend in need can look at it. Look! The right steps to decorate the house 1. Before the renovation, you must first measure the side of the house and then do a good job in the decoration design. Consider the functionality and beauty of each room. You can find professionals to help design and inspection. 2. If the main part is to be demolished and reformed before the formal construction of the renovation, it is necessary to demolish the infill walls, doors and windows, and water and electricity pipes that need to be dismantled according to the design drawings, and then erect the site frame. 3. The first step of the renovation project must be a hydropower reform because many of the plumbing and circuit pipes need to be buried in the walls and underground, so if this step is not done properly, it will lead to subsequent rework. 4. While taking the hydropower reform, we can invite the carpenters to the site and measure the data of risers, decorative ceilings, plaster lines, etc., and start making them. After all these are done, we can prepare them in advance and shorten the construction period. 5. After the above steps are completed, the tiling is performed to cover the tiles, tiles, window sills, etc. The kitchen, the bathroom and the balcony must be floor drained and tiled. The hood can be installed after the kitchen is tiled. 6, for the wall without brick wall treatment, first do grassroots, and then brush the finish. If you want to do wallpaper, you only need to deal with the grass roots. 7, kitchen and bathroom ceiling installation, exhaust fans, Yuba, ceiling lamps also have to be installed at this time. The kitchen cabinets can be installed after the above. 8, after the installation of the door of each room is completed and then wooden floor, followed by wallpaper. 9, to this step you can install a variety of electrical equipment, if you want to install the radiator, after the completion of the wallpaper. Radiator installed and then install the hardware and sanitary ware. 10, after the completion of the renovation is to carry out cleaning and finishing work before they can install curtains and move into furniture appliances. Selection rules for decoration materials 1. Environmental guidelines The indoor environment contains harmful gases, which are generally formed by decorative materials. Therefore, in the selection of building materials certified by the National Environmental Protection Agency, do not choose building materials that have been banned by the State, and do not use materials that are harmful to the human body. Only in this way can we decorate a warm and healthy home with a good interior decoration. 2. Practical guidelines Decoration and decoration materials are not as expensive as possible, and should be combined with the use of properties of the residence. Such as indoor ceiling and partition wall material selection, can be mainly gypsum board, this material is not only low price, but also has fire, mildew resistance, but also sound-absorbing insulation, humidity adjustment. 3. Balance criteria If the decoration is considered economical and practical, we can consider some more economical and applicable building materials without affecting the quality and function of the decoration. For some drainage, wire and other materials should be selected as the first choice for quality, "one-step" principle, would rather spend more money and do not create trouble for the future. Editor's summary: The guidelines for the purchase of decorative materials and the right steps to decorate and decorate the house are introduced here. After you read it, is there any further understanding of the decoration? I hope to be helpful. Want to learn more related knowledge can focus on this site information. Decoration Interior Decoration
The Metal Plate Mesh, as its name implies, refers to the surface of
the metal plate with various shapes. It is classified according to the
processing mode: Punching mesh and metal expanded metal mesh, (referred to as expanded
metal). The overall dimension of the perforated metal has not changed before
and after processing, but metal sheet has more meshes with various shapes and
sizes.
Steel
plate net is made by various metal plate which is punched stretching expansion.
Material: Stainless steel plate, aluminum plate,
low carbon steel plate, aluminum magnesium alloy plate, copper plate, nickel
plate, etc.
The popular size of metal plate mesh:
1.
Thickness: 0.5-8mm
2.
Width of opening: 2.5-50mm
3.
Length of opening: 4.5-100mm
4.
Diameter of opening( for perforated metal): 200mm
5.
Width of wire mesh: 0.5-2m
6.
Length of wire mesh: 1-4m
Use: Steel Plate Mesh is widely used in
chemical machinery, pharmaceutical equipment, food and beverage machinery,
cigarette machines, harvesters, dry cleaning machines, ironing machine, sound
equipment, refrigeration equipment (central air-conditioning) speakers, crafts,
paper, hydraulic fittings, filtration equipment and other industries.
Metal Plate Mesh Products,Perforated Stainless Steel Sheet,Metal Mesh Panels,Metal Mesh Anping Xinzheng Metal Wire Mesh Co., Ltd , https://www.sievingmesh.com
