Guangdong Kinen Sanitary Ware Industrial Co.,Ltd. , https://www.kinengroup.comTwo Effective Lubrication Methods for NSK Bearings
When it comes to maintaining the performance and longevity of NSK bearings, proper lubrication is essential. There are several methods available, but two of the most commonly used techniques are **air-oil mist lubrication** and **oil bath lubrication**. These methods help ensure smooth operation, reduce friction, and extend the life of the bearing.
1. **Air-Oil Mist Lubrication**:
This method involves using a sprayer to mix lubricating oil with compressed air, creating an oil mist. The fine mist is then directed into the NSK bearing. The airflow not only helps in distributing the lubricant evenly but also provides cooling, which is especially important for high-speed and high-temperature applications. This technique is widely used in industrial environments where precision and reliability are critical.
2. **Oil Bath Lubrication**:
This is one of the most straightforward and traditional methods. In this approach, part of the bearing is submerged in an oil reservoir. As the bearing rotates, it picks up the lubricant, which then spreads across the moving parts before returning to the oil tank. It's ideal for low to medium-speed bearings and is often used in machinery where consistent lubrication is required without the need for complex systems. The oil level should be maintained slightly below the center of the lowest rolling element to prevent excessive churning and overheating.
Both methods have their advantages and are chosen based on the specific operating conditions of the bearing. Understanding the right lubrication technique can significantly improve the efficiency and lifespan of NSK bearings.
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Recommend to friends | Comments | Close window
Bearing Related Knowledge
Sliding bearing failure rules, selection of rolling bearing types, micro-defects in imported bearings, measurement of SKF joint bearing temperature, and more.
This article is linked to http://
Please indicate the bearing network at http://
Previous: How to disassemble the bearing of the vibrating screen
Next: The appearance of the IKO bearing temperature is too high and the disposal method
Source: China Bearing Network | Date: August 31, 2013