First, the installation of floor insulation should pay attention to the use of geothermal flooring, consumers must pay attention to step by step to the floor and floor heating. When installing, the surface temperature should be maintained at about 18°C. Before installation, gradually increase the temperature of the concrete floor, increase 5 °C per day, until it reaches about 18 °C ... 80 after the small husband and wife marriage, petty marriage, romantic mood, fashion show, a member of the exclusive cash discount, Mediterranean style blue + White mosaic for the home art, young hot mom 50,000 to create two home 1st shop cash discount coupons to warm this winter is not afraid of cold small apartment mix and match the new fashion trend · 200,000 luxury to create 95 flat space · Dulux paint cost-effective big PK · TV wall small space big content

First, pay attention to floor insulation during installation

When using geothermal floors, consumers must pay attention to the gradual heating of floors and floors. When installing, the surface temperature should be maintained at about 18°C. Before installation, gradually increase the temperature of the concrete floor by 5°C per day until it reaches the standard of about 18°C. In the first 3 days after the installation is completed, the temperature should be maintained. After 3 days, the temperature can be increased as needed, and the temperature can only be increased by 5°C per day.

Second, pay attention to warming step by step

Geothermal heating is used for the first time, and attention should be paid to increasing the temperature slowly. When used for the first time, gradually increase the temperature in the first three days of heating: the first day of water temperature is 18°C, the next day is 25°C, the third day is 30°C, and the fourth day can be raised to normal temperature, ie, water temperature 45°C, surface temperature 28 °C ~ 30 °C. Can not warm up too quickly, too fast, the floor may be cracked due to expansion.

Third, restart after a long time, warming should also be gradual

When the geothermal heating system is turned on again for a long time, it must be used like the first time. The surface temperature should not be too high by strictly following the heating and heating procedures.

It should be noted that with geothermal heating, the surface temperature should not exceed 28°C, and the temperature of the water pipes should not exceed 45°C. If this temperature is exceeded, the service life and life cycle of the floor will be affected. In general families, when the room temperature in winter reaches about 22°C, it is already very comfortable. If the temperature rises normally, it will not affect the use of geothermal floors. Close the geothermal system, pay attention to gradual cooling

With the passage of the seasons, when the weather is warm and indoors no longer requires geothermal heating, attention should be paid to shutting down the geothermal system. There must also be a process of cooling down the floor. The cooling process of the floor must also be gradual, not abruptly reduced, if the cooling rate is too fast, It will also affect the life of the floor.

Four, when the room is too dry, you can consider humidification

In winter, the climate is dry, and geothermal heating is used. If the floor is exposed to high temperatures for a long time, it will be easy to crack. At this time, the owner must humidify the room so as not to crack the floor.

Del floor nature floor cement heating space room paint fashion small apartment

High Wattage Lamp Emergency Conversion Kit

High Wattage Lamp Emergency Conversion Kit can converts high wattage LED luminaire 50-100W in emergency lighting.
With the LiFePO4 emergency battery internal. Its operation is by regulating the luminaire 100% emergency output and maintain 60-90mins emergency time automatically when the main power cuts. Widely using for factory, building, warehouse, school, hospital, library etc.

Replacing Emergency Lights,Best Emergency Light,Automatic Emergency Light,Lamp Emergency Conversion Kit

Foshan Nai An Lighting Electric Co.,ltd , https://www.emballast.com