Asphalt heat pump installation precautions Asphalt heat pump and we usually use the asphalt heat pump can basically be used for the same occasion, can also completely replace the asphalt pump. Asphalt heat pump in the installation need to pay attention to five issues: 1, installation of bitumen heat pump should pay attention to the arrow on the valve body should be consistent with the flow of the medium. 2, bitumen insulation pump should ensure that the supply voltage is within the range of 15% -10% of the rated voltage fluctuations within the normal work. 3, asphalt insulation pump to be thoroughly cleaned before installation of the pipeline. In the pipeline access to the media to ensure that no impurities. The valve should be installed before the filter. 4, after the installation of asphalt insulation pump, the pipeline may not have a reverse pressure. 5, when the bitumen insulation pump failure or cleaning, in order to ensure the continued operation of the system, the bypass device should be installed. Asphalt pump in the vibration aging depends on the choice of vibration aging process. Vibration aging process is more complex, must be box-like parts of the pre-vibration process analysis, design and optimization of vibration parameters to improve the effect of vibration aging. According to the workpiece material, structure, the form and process of manufacturing rough, analysis of the distribution of residual stress field box, dimensional accuracy requirements, as well as the working load, the possible causes of failure and other factors were analyzed, and then decide to implement the vibration aging Craft line and the key parts of aging.
Cyclorama Light,Cyclorama Wash Effect Light,Led Cyclorama Wash Effect Light,Cyclorama Led Lighting
EV LIGHT Guangzhou Co., Ltd , https://www.evlightprofessional.com