What happens to the next hammer? Don't miss the wrong wall

When you buy a new home, you will always have to renovate it. Xiao Bian will often remind everyone to pay attention to safety during the renovation. However, the tragedy always happens from time to time. At about 12:50 on April 11, a three-story building on Xixia Road in Songshan Town, Songjiang District, Shanghai collapsed. It is reported that the collapse of the house was caused by the illegal decoration of the ground floor shop.

The picture shows the scene of the accident

Hey, it is estimated that he arrived at the bearing wall. The house had no bearing walls. It was like a balloon was let go. It must not be confused. Here, we still have to talk to you about some considerations for decorating the wall.

First, the procedure is in place

Renovation activities such as knocking on walls, drilling holes in drill holes, etc., in the management of strict communities and streets, the notice of the property is still to be notified, the office's procedures should still be done, to avoid extrapolating the construction of the project, affect the decoration plan.

Second, make a good greeting to the neighbors

In the renovation of the wall construction, the noise and vibration are relatively large. If there are neighbours around, it will affect the lives of the neighbors. Therefore, prior to the construction of the project, we must greet our neighbors in advance to obtain their understanding and support. Make the project go smoothly.

Third, professional formal security

Some owners privately find someone to knock walls. It is recommended that you knock on the wall to find a professional wall knock master.

1. They are more professional, knowing which are bearing walls, counterweight walls, and separating walls, and understand which type of wall can be removed and which walls cannot be removed.

2. Although the knocking on the wall is rough, but the rough work has to be meticulous. The master knocking on the wall is rich in experience. You can minimize the adverse effects caused by the knocking of the wall on the house and the stucco layer when knocking on the wall.

3, knocking on the wall also has a certain degree of danger. Professional wall knocking masters can safely complete the construction. When encountering the wires and steel bars in the wall, they can effectively deal with them. In addition, the professional master construction tools are also relatively complete, and the tasks can be smoothly completed. In fact, due to negligence and lack of experience, accidents caused by improper construction of amateur wall-knock personnel caused injuries or death.

Fourth, the weight of housing can not be dismantled

The load-bearing wall must not be demolished. This is an important and basic point. At the same time, when there are water and electricity lines on the wall, it is necessary to control the total hydropower valve. You can ask the water electrician in advance to do a good job in the construction part of the hydropower conversion work, so that the construction can reduce the impact on the hydropower facilities. The area of ​​the demolished wall and the size, location, and use of the wall hole to be drilled are reasonably determined as needed.

Fifth, mark clearly knocking the wall accurately

In addition, if there is no time for the owner to be present on the job, the wall to be knocked must be clearly explained to the master who knocked the wall. It can be drawn with chalk, etc., so that the construction personnel can knock on the wrong wall.

These precautions are very easy to do, do not take too much trouble, because it is not only related to the quality of the decoration of the house, but also relates to the personal safety of you and others. A little more attention, less hidden dangers, creating a safe and beautiful home life.

Decoration construction knowledge

Suspension Clamp is used for binding aluminum belts or wire protective bars outside the conducting wires when laying aluminum strand cable or steel core aluminume strand cables. The applicable outer diameter of conducting wires includes the wrapping material. The clamp body and keepers are aluminium alloy, cotter-pin is stainless steel, the other parts are hot-dip galvanized steel.

Suspension clamps are used to hang conductor or ground wire through insulators or Link Fitting to tower arms or substation structures.The clamps are made of malleable iron or aluminium alloy.

The suspension angle of suspension clamps is not less than 25℃,the radius of curvature is not less than the dia of installed leads by 8,and the percentage of the grip on different kinds of leads to the calculating capability of snap show in following table.

As the suspension clamps are used to AAC and ACSR,the conductor may be wound by aluminium tapes or preformed armour rods for protecting these taps or rods are included in the diameter of suitable conductor.

Typical application:Electrical Power Fitting 

Suspension Clamp

Suspension Clamp,Cable Suspension Clamp,Aluminum Alloy Suspension Clamp,Jumper Suspension Clamp

Shandong Vantage International Trade Co., Ltd. , https://www.steelplate.be