Please come to inquire more, we will attentively serve you, let us all can have a satisfactory result. Blended Blues Glass Mosaic,Square Glass Mosaic Tile,Swimming Pool Mosaic Tile Glass,Colored Glass Mosaics Gong Loon Jadeite Manufacture Co.,Ltd , https://www.bluebird-mosaic.com
Here you can find the related products in Strip/Rectangle Shape Glass Mosaics, we are professional manufacturer of Rectangle Shape Glass Mosaics,Strip Shape Glass Mosaics,Mini-Brick Marble Mosaic,Glass Mosaic Wall Decor. We focused on international export product development, production and sales. We have improved quality control processes of Strip/Rectangle Shape Glass Mosaics to ensure each export qualified product.
If you want to know more about the products in Strip/Rectangle Shape Glass Mosaics , please click the product details to view parameters, models, pictures, prices and other information about Rectangle Shape Glass Mosaics,Strip Shape Glass Mosaics,Mini-Brick Marble Mosaic,Glass Mosaic Wall Decor.
Whatever you are a group or individual, we will do our best to provide you with accurate and comprehensive message about Strip/Rectangle Shape Glass Mosaics!
Safety valve is to prevent the pressure equipment and containers or safety devices that can easily cause the pressure to rise or the pressure inside the container exceeds the limit burst. Safety valve is a pressure vessel, boiler, pressure pipe and other pressure systems widely used as a safety device to ensure the safe operation of the pressure system. When the container pressure exceeds the design requirements, the safety valve automatically opens to expel the excess pressure in the gas reducer to prevent the container or pipeline from being damaged. When the pressure in the container drops to normal operating pressure, it automatically shuts off to avoid all the gas being discharged due to overpressure of the container, resulting in waste and production interruption. Safety valve mainly by the valve seat, disc (spool) and the loading mechanism of three parts. Some seats and the valve body is a whole, and some are assembled with the body, it is connected with the device. Valve often with a valve stem, it is tightly on the valve seat. Above the valve is the loading mechanism, the size of the load can be adjusted. When the pressure inside the device within a certain range of working pressure, the internal medium acting on the valve above the force is less than the loading mechanism on the valve above the force, the difference between the valve flap and valve seat constitute the sealing force, So that the valve flap pressed against the seat, the device's media can not be discharged. When the pressure inside the device exceeds the specified working pressure and reaches the safety valve opening pressure, the force acting on the neutral valve by the internal medium is greater than the force exerted by the loading mechanism on it. As a result, the valve disc leaves the valve seat, the safety valve opens, The medium is discharged through the valve seat. If the displacement of the safety valve is greater than the safe discharge of the equipment, the pressure in the equipment will gradually decrease. After a short time of exhausting, the pressure will drop back to the normal working pressure. At this point the pressure on the valve above the force is less than the loading mechanism applied to it above the force, the valve flap and the valve seat, the media stop discharging, the device to maintain normal working pressure to continue running. Therefore, the safety valve through the disc on the media force and the loading and unloading agencies force the growth and decline, to close or open their own in order to achieve the purpose of preventing over-pressure equipment. When setting the safety valve should pay attention to the following points: (1) container gas, liquid two-phase material safety valve should be installed in the gas phase. (2) Safety valve for the release of combustible liquid, the safety valve outlet should be connected with the accident tank. When the discharge of materials is high temperature combustible material, its receiving container should have the appropriate protective equipment. (3) The general safety valve can be vented locally. The vent should be more than 1 meter above the operator and should not face the open flame within 15 meters. Spark locations and high temperature equipment should be distributed. Indoor equipment, container safety valve vent should be drawn to the roof, and above the roof 2 meters above. Safety valve principle and settings (4) When the safety valve inlet has a cut-off valve, the cut-off valve should be normally open state, and to be sealed to avoid errors.